Abstracts

Research Abstracts

This collection contains the abstracts of the theses and dissertations (tagged for general public viewing) authored by undergraduate, masters, and doctoral students at the Department of Chemical Engineering, UPLB.

Printed copies are available at the UPLB Library.

This page is under construction.

2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1989

2021

An Economic Analysis on the Potential of Water Hyacinth Biomass as an Alternative Energy Source in Residential Households

A Review on Alternative Reagents to Cyanide and an Economic Evaluation of a Thiosulfate Leaching Plant for Gold Extraction

Statistical Comparison of Epoxy Thermosets Reinforced using Microfibers from Different Natural Sources

Parametric Study on the Decolorization of Sugar Factory Wastewater via Oxidation using Electrolyzed Water

A Comparative Study on Carbonization Processes of Agricultural Wastes and Forest Residues for Supercapacitor Application: A Case Study

Improving Bamboo-Based Pulp and Paper Properties by Removing the Bamboo Nodes Prior to Pulping

Case Study: Utilization of Lignin from Philippine Fast-Growing Pulpwood Species for Sunscreen Applications

Preliminary Evaluation of a Microbial Desalination Cell as a Small-Scale Seawater Reverse Osmosis Pretreatment

Techno-Economic Comparison of Chromium (VI) Removal from Tannery Wastewater using Graphene Oxide Versus Magnesium Oxide

Comparative Analysis of Microalgal Cultivation Methods for Phycoremediation Application of Nutrient Removal from Wastewater

Environmental Impact Assessment of the Polylactic Acid Bioplastic Production of Sweet Sorghum Juice

Preliminary Techno-Economic Analysis of Astaxanthin Production using Haematococcus pluvialis

Comparative Evaluation of the Different Methods for the Utilization of Sugarcane Filter Cake

A Comparative Study of Mea and Piperazine-Promoted K₂C₂O₃ for Post-Combustion of CO₂ Capture and an Economic Evaluation of a Coal-Fired Power Plant with Absorption-Based CO₂ Capture by PZ-K₂CO₃

Comparison of the Performance of Activated Carbon Produced from Rice Straw and Mango Kernel in Removing Chromium (VI) in Paint Manufacturing Wastewater: A Case Study

Comparative Analysis of the Different Pre-treatment Methods of Sugarcane Bagasse for Bioethanol Production

A Case Study on the Performance of Vertical and Horizontal Flow Constructed Wetlands for Duck Farm Wastewater Treatment

Technical and Economic Feasibility of the Recycling of Non-Metallic Portion of Waste Printed Circuit Board

Case Study on the Production of Polylactic Acid (PLA) using Sugarcane By-Products and Residues in the Philippines

Parametric Study on the Decolorization of Aqueous Methylene Blue Solution using Electrolyzed Water

Comparative Techno-economic Assessment of Conventional and Supercritical Transesterification Processes in Microalgal Biodiesel Production

2020

A Case Study on the Comparative Properties and Performance of Graphite Oxide, Graphene Oxide and Reduced Graphene Oxide on Cationic Dye Treatment

Parametric Study on the Decolorization of Aqueous Methylene Blue Solution using Electrolyzed Water

Comparative Study on Batch Ethanol Fermentation Performance of Saccharomyces cerevisiae and Zymomonas mobilis in Equimolar Mixture of Glucose and Fructose Substrates

Case Study on the Solvent Extraction of Rice Bran Oil using d-Limonene, a-Pinene, and p-Cymene as Alternative Green Solvents for n-Hexane

Effects of K2CO3 and Aqueous Phase Recycling on the Hydrothermal Liquefaction of Corn Stover

Ultrasound-Assisted Sol-gel Synthesis of Silica Particles from Citric Acid-Leached Rice Hull Ash

Evaluation of Fenton Process as Treatment Method for Pulp and Paper Wastewater: A Case Study

Comparative Analysis of Sugarcane Bagasse and Fly Ash as Adsorbents for the Treatment of Textile Effluents

A Comparative Study on the Effect of UV-Irradiation on the Photochemical Oxidation of Aqueous Oxytetracycline

Evaluation of Biomass Adsorbents for the Removal of Cr(VI) from Chromium-containing Wastewater: A Case Study

Effects of Nutrient Supplementation on Bioethanol Production from Sugarcane Molasses Using Instant Dry Yeast

Production of Carbon-Based Material Via Microwave Pyrolysis for Energy Storage Application: A Case Study

Comparative Analysis on the Microalgal Cultivation Methods of Chlorella vulgaris for Biodiesel Production

Energy Assessment of Incineration of Municipal Solid Waste (MSW) In The Philippines

Parametric Study on the Adsorption of Methyl Orange on Polyaniline-Coated Corn Stover Biomass

Emerging Strategies and Technology in Solid State Fermentation for Fungal Phytase Production

Comparative Analysis on the Decolorization of Different Dye Solutions Using Electrolyzed Water

Technical and Economic Feasibility of Using Bamboo for Pulp and Papermaking in the Philippines: A Case Study

A Case Study on the Use of Magnetic Biochar from Agricultural Waste as Adsorbent of Aqueous Heavy Metals and Micropollutants

Assessment on the Viability of Iron on Carbon Dioxide Capture and Storage Technologies

Comparison of Activated Carbon from Coffee Husks and Surface-Modified Zeolite in terms of Decolorization Activities

Evaluation of Fenton Process for the Treatment of Antibiotics-Containing Wastewater: A Case Study

Evaluation of algal biofilm reactor for commercial-scale microalgal cultivation for use in the food industry

Evaluation of Various Biomass Adsorbents for the Treatment of Textile Wastewater: A Case Study

Cement-based Solidification/Stabilization of Chromium from Tannery Wastewater using Municipal Solid Waste Fly Ash as Admixture

Parametric Study on the Adsorption of Oxytetracycline using Magnetized Activated Carbon from Rice Straw

Forest Nanotechnology Intervention: A Case Study on the Alternative Use of Industrial Tree Plantation Species

Extraction of Oils from Oleaginous Yeast (Rhodotorula paludigena) using Polar and Nonpolar Solvents

Comparison of the Effectiveness of different Titanium Dioxide-Based Composites on the Photocatalytic Removal of Dyes from Aqueous Solution

Evaluation of Fenton Process as Treatment Method for Paint Wastewater: A Case Study

Production of Carotenoid Pigment from Oleaginous Yeast (Rhodotorula sp.) using Agricultural Wastes as Substrates

Comparison of the Properties of Abaca (Musa textilis Nee.) and Kapok (Ceiba pentandra (L) Gaertn) as Raw Materials and their Potentials for Cellulose Nanocrystal Production: A Case Study

Cellulose Nanocrystals (CNC) Extracted from Acid Hydrolyzed Falcata Wood Kraft Pulp as Reinforcement to Glycerol-Plasticized Starch (GPS) Biofilm

Design, Fabrication, and Performance Evaluation of a Photocatalytic Reactor for the Degradation of Aqueous Crystal Violet Solution

Evaluation of Different Catalysts for Glucose Isomerization at Various Operating Conditions: A Case Study

Effect of Selected Catalyst on the Hydrothermal Liquefaction of Corn Stover

A Comparative Study on Nanofiller Reinforcement on the Properties of Thermoplastic Starch Films as Packaging Materials

Parametric Study on the Effect of Bulk Density, Moisture Content, and Type of Paper on the Combustion Behaviour of Paper in a Packed Bed Reactor

Economic Viability Assessment of Anaerobic DIgestion of Swine Farm Waste in the Philippines

Magnetic Biochar Performance on Heavy Metal Removal from Wastewater

Economic Viability Assessment of Municipal Solid Waste Incineration (MSWI) in the Philippines

Technical Analysis of Multi-stage Chemical Leaching of Waste Printed Circuit Board Recycling Technology and its Application in the Philippines

Design, Fabrication, and Performance Evaluation of a Photocatalytic Reactor for Degradation of Crystal Violet Dye in Aqueous Solution

Major Advances and Challenges in the Synthesis of Graphene Oxide-based Heterogeneous Catalysts

Performance Efficiency and Stability Assessment of Graphene Oxide-Based Heterogeneous Catalysts

A Case Study on the Comparative Properties and Performance of Graphite Oxide, Graphene Oxide and Reduced Graphene Oxide on Cationic Dye Treatment

2019

Decolorization of Distillery Slop by Heterogeneous Fenton Process using Synthetic Schwertmannite as Catalyst

Parametric Study on the Adsorption of Nitrates from Wastewater Using Activated Carbon and its Recovery by Desorption For Nitrocellulose Production

Parametric Study on the Extraction of Flavonoids and Phenolics From Waste Onion Leaves by Conventional Solvent Extraction and Microwave Assisted Extraction Using Aqueous Acetone as Solvent

Parametric Study on the Color Removal of Methylene Blue Solution Using Titanium Dioxide Impregnated on Pili Nut Shells as Catalyst

Reinforcement of Epoxy Thermoset Composite Using Acetone-treated Cellulose Microfibers From Sugarcane Bagasse

Parametric and Kinetic Studies on the Adsorption of Methylene Blue Using Activated Carbon From Calamansi Peels

Parametric Study on the Production of Levulinic Acid by Acid-catalyzed Hydrolysis of Corn Husk

Photocatalytic Decgradation of Methylene Blue Using Immobilized Copper-doped Titanium Dioxide

Optimization of Denaturant Concentration, Crosslinker Concentration, and Pressing Time for Bioadhesive Production From Chlorella vulgaris Protein Extract

Design, Fabrication and Preliminary Performance Evaluation of a Semi-Continuous Updraft Direct Combustion Equipment with Rotating Paddles

Optimization of Denaturant Concentration, Crosslinker Concentration, and Pressing Time for Bioadhesive Production From Chlorella vulgaris Protein Extract

Synthesis and Characterization of Iron Doped Mesoporous Silica Catalyst for Treatment of Biodiesel Wastewater

Reinforcement of Epoxy Thermoset Composite with Ethyl Acetate-Treated Cellulose Microfibers from Sugarcane Bagasse

Reinforcement of Epoxy Thermoset Composite Using Epoxidized Kraft Lignin from Sugarcane Bagasse

Reinforcement of Epoxy Thermoset Composite Using Microfibers from Pineapple Crown Leaves

Parametric Study on the Ultrasound-Assisted Extraction of Phenolic Compounds from Indian Goosegrass (Eleusine indica (L.) Gaertn.) Using Aqueous Ethanol as Solvent

Parametric Study on the Treatment of Pulp Wastewater by Heterogeneous Fenton Process Using Chemically-Synthesized Schwertmannite as Catalyst

Parametric Study on the Decolorization of Aqueous Malachite Green Solution Using Electrolyzed Water

Parametric Study On The Extraction Of Copper From Acid-Leached Waste Printed Circuit Boards By Secondary Leaching

Parametric Study on the Production of Levulinic by Acid-Catalyzed Hydrolysis of Water Hyacinth Leaves

Parametric Study on the Production of Levulinic Acid by Acid-Catalyzed Hydrolysis of Kans Grass

Parametric Study on the Treatment of Paint Manufacturing Wastewater by Heterogeneous Fenton Process using Chemically-synthesized Schwertmannite as Catalyst

Parametric Study on the Extraction of Iron from waste Printed Circuit Boards by Acid Leaching

Design, Fabrication and Performance Evaluation of a Photocatalytic Reactor Using Immobilized TiO₂ on the Removal of Oxytetracycline in Water

Comparative Analysis of Hydrogen Sulfide (H₂S) Gas Adsorption in Activated Carbon from Sugarcane Bagasse and in Scoria Rock

Parametric Study on the Removal of Chromium (VI) From Tannery Wastewater Using Graphene Oxide As Catalyst

Production of Biocomposite by Partial Replacement of Epoxy Resin with Candlenut (Aleurites moluccanus) Seed Oil

Parametric Study on the Reduction of Chemical Oxygen Demand (COD) from Dairy Industry Wastewater Using Synthesized Graphene Oxide as Catalyst

Parametric and Optimization Study on the Production of Cellulose Nanocrystals (CNC) from Gmelina (Gmelina arborea Roxb.) by Acid Hydrolysis

Parametic and Kinetics Study on the Removal of Methylene Blue Aqueous Solution Using Pelletized Bagasse Fly Ash as Adsorbent

Parametric and Kinetic Studies of the Treatment of Aqueous Malathion Solution using Electrolyzed Water

Parametric Study on the Adsorption of Methylene Blue from Aqueous Solution using Graphene Oxide/Cellulose Composite

Parametric Study on Transesterification using Hyroxide-impregnated Calcium Oxide as Catalyst and Tetrahydrofuran as Co-solvent

Methanolysis of Refined Coconut Oil using Pelletized Hydroxide-Impregnated Calcium Oxide as Heterogeneous Catalyst

Parametric and Kinetic Study on the Removal of Methylene Blue from Aqueous Solution Using Pelletized Bagasse Fly Ash as Adsorbent

Parametric Study on the Extraction of Flavonoids and Phenolics from Waste Onion Leaves by Conventional Solvent Extraction and Microwave Assisted Extraction Using Aquous Ethanol as Solvent

Parametric Study on the Extraction of Magnesium from Serpentinite of a Mixed Dump on a Nickel Laterite Ore Mine for Indirect Carbon Sequestration

Photocatalytic Decolorization of Spent Coffee Wash with Activated Carbon-Immobilized Titanium Dioxide in a UV Photoreactor

Parametric Study on The Removal of Hexavalent Chromium from Synthetic Solution and COD Wastewater by Adsorption Using Rice Straw-Based Activated Carbon

Chromium Removal from Chrome-Tannery Effluent after Alkaline Precipitation by Adsorption using Municipal Solid Waste-Derived Activated Biochar

Parametric Study on the Adsorption of Crystal Violet from Aqueous Solution Using Polyaniline-Coated Bagasse as Adsorbent

Parametric Study of Microwave-Assisted Extraction of Runo (Miscanthus sinensis Andersson) Dye and its Application to Paper & Cotton Fabric

Parametric Study on the Decolorization of Clarified Juice using Activated Carbon from Bagasse

Optimization of Biochar Production Through Microwave Pyrolysis of Corn Cob Wastes and its Characterization for Energy Storage Application

Nitrate Removal from Aqueous Solution by Adsorption Using Municipal Solid Waste-Derived Activated Biochar

Reinforcement of Epoxy Thermoset Composite Using Cellulose Microfibers from Napier Grass [Cenchrus purpureus (Schumach.) Morrone]

Parametric, Isotherm and Kinetic Studies on the Removal of Phenol from an Aqueous Solution and Industrial Wastewater Using Calamansi Peels Activated Carbon Adsorbent

Parametric and Kinetic Studies on the Photocatalytic Decolorization of Aqueous Congo Red Solution using Aluminum Plate-Immobilized TiO2-Bagasse Fly-ash Mixture

Parametric Study on Adsorption of Iron and Manganese from Aqueous Solution Using Activated Carbon from Coconut Shell

Production of Geopolymer Composite from Sugarcane Bagasse Fly Ash Using Potassium Hydroxide and Sodium Sulfate as Activators

2018

Parametric Study on the Adosroption of Urea on Montmorillonite

Chromium Removal from Chrome Tannery Effluents after Alkali Precipitation by Adsorption using Cacao Pod Husk-derived Activated Carbon

Chromium Removal from Chrome-Tannery Effluent after Alkaline Precipitation by Adsorption using Durian Shell-Derived Activated Carbon

Parametric Study on Potassium Carbonate-Glycerin Deep Eutectic Solvent for Carbon Dioxide Capture

Parametric Analysis of Silica Extraction Process via Alkaline Fusion and Hydrothermal Desilication Methods from Municipal Solid Waste Bottom Ash Derived from Direct Combustion

Parametric Study on Solidification/Stabilization of Chromium Containing COD Waste using Rice Husk Ash as Binder

Parametric and Kinetic Studies on the Decolorization of Aqueous Methyl Orange Dye Solution using Electrolyzed Water

Design, Fabrication, and Preliminary Testing of a Tangential Plug Flow Reaction for the Decolorization of Simulated Annatto (Bixa orellana L.) Wastewater

A Comparative Study of Electroflocculation and Chemical Flocculation Processes on Monosodium Glutamate Wastewater

Parametric Investigation of Biochar Yield from Microwave Pyrolysis of Corn Cob Wastes

Parametric and Kinetic Studies on the Decolorization of Aqueous Congo Red Dye using Electrolyzed Water

Parametric Study on the Production of Levulinic Acid by Acid-Catalyzed Hydrolysis of Rice Husks

Parametric Study on Solidification/Stabilization of Chromium Containing Laboratory Waste using Rice Straw Ash as Binder

Characterization of Kawayan Tinik (Bambusa bluemeana Schult.f.) Handsheets Reinforced with Cellulose Nanofibrils Obtained via Friction Grinder Supermass Collider

Parametric and Kinetic Studies of Microwave-assisted Dilute Sulfuric Acid Hydrolysis of Peanut (Arachis hypogaea L.) Shells

Parametric and Kinetic Study on the Degradation of Distillery Slop using Electrolyzed Water

Parametric Study on the Photocatalytic Decolorization of Synthetic Melanoidin using Parabolic Trough Solar Concentrator

Parametric Study on the Dilute Acetic Acid Hydrolysis of Rain Tree (Albizia saman (Jacq.) Merr.) Pods for Bioethanol Production

Parametric and Kinetic Studies on the Adsorption of Aqueous Lead using Pelletized Bagasse Fly Ash

Effect of Treatments on the Oxytetracycline Uptake of Aluminum Foil

Parametric and Kinetic Studies on the UV-Irradiated Photocatalytic Removal of Oxytetacycline from Aqueous Solution using Pelletized Magnesium Oxide as Catalyst

Parametric Study on the Photocatalytic Decolorization of Congo Red Dye Solution using a Parabolic through Solar Concentrator

Parametric Study on the Effect of the Addition of Ferric Oxide, Titanium Dioxide, Zinc Oxide and Copper Oxide on the Heat of Fusion and Thermal Conductivity of Myristic Acid

2017

Parametric Study on Acetone-Butanol-Ethanol (ABE) Fermentation of Sweet Sorghum (Sorghum bicolor ‘SPV 422’) Syrup using Clostridium acetobutylicum 1532

Rice Hull Nanosilica as Filler to Chitosan-Based Fruit Coating for Shelf Life Extension of Mango

Parametric and Kinetic Studies on the Storage Stability of Milk Clotting Enzyme

Parametric Study on the Adsorption of Methyl Orange from Model Paint Wastewater using Activated Carbon from Pineapple Peels

Electroflocculation of Monosodium Glutamate Manufacturing Wastewater

Development of Geopolymer Paste Mixture made from Low-Calcium Fly Ash using Sodium Silicate and Potassium Hydroxide Combination as Activator

Parametric Study on the Chemical Oxygen Demand Reduction and Color Removal of Distillery Digester Effluent using Electrolyzed Water

Parametric Study on Microwave-assisted Dilute Sulfuric Acid Pretreatment for Enzymatic Hydrolysis of Sweet Sorghum Bagasse

Development of Geopolymer Paste Mixture Made from Low-Calcium Fly Ash using Sodium Silicate-Sodium Hydroxide-Potassium Hydroxide Combination as Activator

Parametric Study on Pyrite-Catalyzed Heterogeneous Fenton Process for the Treatment of Simulated Plant Wastewater

Parametric and Kinetic Studies on the Chemical Oxygen Demand and Color Reduction of Paint Manufacturing Wastewater using Electrolyzed Water

Parametric Study on Microwave-Assisted Sodium Hydroxide Pretreatment for Enzymatic Hydrolysis of Sweet Sorghum Bagasse

Parametric Study on Acetone-Butanol-Ethanol (ABE) Fermentation of Sugarcane Syrup using Clostridium acetobutylicum 1200

Mechanical Production of Cellulose Nanofibrils (CNF) from Bleached Kawayan Tinik (Bambusa blumeana Schult.f.) Pulp: Effect of Holocellulose Preparation and Number of Passes in the Supermass Collider

Parametric and Kinetics Studies on the Decolorization and COD Reduction of Poultry Wastewater using Electrolyzed Water

Dilute Acid Hydrolysis of Calamansi (Citrus x microcarpa Bunge) Peels by Microwave Irradiation

Parametric Study on the Degradation of Tetracycline in Aqueous Solutions by Heterogeneous Fenton Process using Iron (III) Oxide

Storage Stability of Sweet Sorghum (Sorghum bicolor ‘SPV 422’) Syrup from Unclarified Sweet Sorghum Juice

Parametric Study on Methyl Ester Production from Two-Stage Base-Catalyzed Transesterification of Soybean Oil

Parametric Study on the Acetone-Butanol-Ethanol (ABE) Fermentation of Sugarcane (Saccharum officinarum, L.) Molasses using Clostridium acetobutylicum 1200

Optimization Study on Solvent Extraction of Oil from Petroleum Nuts (Pittosporum resinferum Hemsl.) using Ethanol as Solvent

Parametric Study on the Color Reduction of Aqueous Malachite Green by UV-Assisted Photocatalysis using Pelletized Magnesium Oxide

Retrofitting and Performance Evaluation of Packed Gas Absorption Column and Comparative Analysis of Titration Methods for Carbon Dioxide Absorption in Water

Optimization of Soil Washing Conditions using Chitosan as Chelating Agent for the Removal of Chromium from Contaminated Soil by Response Surface Method

Parametric Study on Free Fatty Acid (FFA) Reduction of Used Cooking Oil using Silica Gel Produced from Sugarcane (Saccharum officinarum (L.)) Bagasse Bottom Ash

Parametric Study on Acetone-Butanol-Ethanol (ABE) Fermentation of Sugarcane (Saccharum officinarum, L.) Molasses using Clostridium acetobutylicum 1532

Parametric Study on the Treatment of Monosodioum Glutamate (MSG) Wastewater by Heterogeneous Fenton Process using Pyrite

Parametric and Kineticcs Studies on the Decolorization of Aqueous Methylene Blue Solution using Acidic Electrolyzed Water

Optimization Study on Solvent Extraction of Oil from Petroleum Nut (Pittosporum resiniferum Hemsl.) using Ispropanol as Solvent

Decolorization of Synthetic Melanoidin using Activated Carbon from Sweet Sorghum (Sorghum bicolor (L.) Moench) Bagasse

Parametric Study on Urea-Zeolite Fertilizer Formulation by Impregnation

Retrofitting and Testing of Trickling Filter on the Removal of Copper from Domestic Wastewater

Parametric Study on Binary Solvent Extraction of Oil from Petroleum Nut (Pittosporum resiniferum Hemsl.) using Hexane and Ethanol

Screening Study on Bioethanol Production From Sweet Sorghum (Sorghum bicolor L. Moench) SPV 422 Syrup using Saccharomyces cerevisiae 2011

Parametric Study on the Extraction of Crude Wax from Sugarcane Peelings using Ethanol as Solvent for Policosanol Production

Optimization of High-purity Silica Production from Rice Hull Ash by Citric Acid Leaching

Optimization of Soil Washing Conditions using Ethylenediaminetetraacetic Acid (EDTA) as Chelating Agent for the Removal of Chromium from Contaminated Soil by Response Surface Method

Coagulation-Flocculation Treatment of Slaughterhouse Wastewater using Calcium Carbonate and Assessment of Asian Green Mussel (Perna viridis) Shells as Aleternative Coagulant Source

Parametric and Kinetic Studies on the Microwave-Assisted Hydrolysis of Cassava Peels (Manihot esculenta Crantz) using Dilute Sulfuric Acid

Optimization of Soil Washing Conditions using Chitosan as Chelating Agent for the Removal of Iron from Contaminated Soil by Response Surface Method

Parametric Study on Pyrolysis Conditions for the Yield and Phyco-chemical Characteristics of Biochar using Waste Cacao Pod Husk

Parametric Study on Binary Solvent Extraction of Oil from Petroleum Nut (Pittosporum resiniferum Hemsl.) using Hexane and Isopropanol as Solvents

Parametric Study on the Treatment of Distillery Slop by Heterogeneous Fenton Process using Pyrite

Biosorption of Hexavalent Chromium from Simulated and Actual Chromium-containing Wasterwater by Kappaphycus spp. Doty Biomass

Parametric and Kinetic Studies on the Color Removal of Aqueous Methylene Blue By Adsorption using Bagasse Fly Ash as Adsorbent

Development of Geopolymer Paste Mixture Made from Low-Calcium Fly Ash using Sodium Silicate and Sodium Hydroxide Combination as Activator

Parametric Study on the Effect of Addition of Copper Oxide, Titatnium Dioxide, Iron Oxide and Zinc Oxide on Heat of Fusion and Thermal Conductivity of Lauric Acid

Parametric Study on the Treatment of Sugar Refinery Spent Ion-Exchange Process (SIEP) Effluent by Heterogeneous Fenton Process using Iron (III) Oxide

Storage Stability of Sweet Sorghum (Sorghum bicolor ‘SPV 422’) Syrup from Clarified Sweet Sorghum Juice

Parametric Study on the Effect of Addition of Copper, Iron, Titanium & Zinc Oxides on the Heat of Fusion and Thermal Conductivity of Palmitic Acid-Stearic Acid Mixture

2016

Kinetics of Chemical Oxygen Demand (COD) Reduction of Distillery Slop Using Calcium Peroxide as Oxidant Source For the Modified Fenton’s Process

Parametric Study on the Photocatalytic Degradatioon of Oxytetracycline using Zinc Oxide-PANI (ZnO-PANI) Composite as Photocatalyst

Parametric Study on the Alkali Pretreatment of Abaca (Musa textilis Née) Waste Fibers Using Sodium Hydroxide

Parametric and Optimization Studies on Crude Wax Extraction From Sugarcane Filtercake Using Ethanol For Policosanol Production

Parametric and Optimization Study on the Enzymatic Extraction of Pectin from Mango Peels

Extraction of Phytohormones from Waste Coconut Water by Adsorption using Coconut-Shell-Derived Granular Activated Carbon

Correlation Study on the Time of Harvest, Number of Ratoons, Sugar Yield (LKg/TC), Purity and Trash Content of VMC 84-524 and Phil 75-44 for Crop Years 2012-2013 and 2013-2014 in CADP, Inc., Nasugbu, Batangas, Philippines

Parametric Study on Solvent Extraction of Oil from Petroleum Nut (Pittosporum resiniferum Hemsl.) using Isopropanol as Solvent

Parametric Study on Decolorization of Congo Red Dye Solution using Bagasse Bottom Ash as Adsorbent

Parametric and Optimization Studies on Oxytetracycline Photocatalytic Oxidation using Pelletized Titanium Dioxide

Parametric Study on the Clarification of Sweet Sorghum (Sorghum bicolor L. Moench ‘SPV 422’) Juice for Syrup Production

Parametric Study on Solvent Extraction of Oil from Petroleum Nut (Pittosporum resiniferum Hemsl.) using Cyclohexane as Solvent

Parametric and Kinetic Study on the UV-Irradiated Adsorption of Aqueous Malachite Green On Synthesized Alumina over Aluminum Sheets

Parametric and Kinetic Studies on the UV-Irradiated Adsorption of Aqueous Oxytetracycline on Synthesized Alumina Over Aluminum Sheets

Parametric Study on Thermal Decarboxylation of Palm Oil using Magnesium Oxide as Catalyst

Parametric Study and Optimization of Process Conditions for Solvent Extraction of Polyphenols from Mango Seed by Response Surface Methodology (RSM)

Retrofitting, Performance Evaluation and Screen Effectiveness Model Development of a Vibrating Screen Separator

Parametric Study on Ethanol Production of a Yeast Isolate (1-TBF7y-1) using Final Molasses as Fermenting Medium for Alcoholic Beverages

Brightness and Physical Properties of Handsheet Paper Made from Kawayan Tinik (Bambusa blumeana Schult. f.) with Starch Encapsulated Gamma-alumina as Filler

Parametric Study on the Adsorption of Oil using NaOH-Treated and Untreated Sugarcane Bagasse as Bioadsorbents

Parametric Study on the Decolorization of Direct Turquoise Blue GL Dye using Acid-Treated Bagasse Bottom Ash as Adsorbent

Parametric Study on the Probiotic White Cheese Production from Carabao’s Milk using Freeze-Dried Lactobacillus casei (Orla-Jensen) Hansen and Lessel 030

Parametric Study on Ethanol Fermentation of Sweet Sorghum (Sorghum bicolor (L.) Moench ‘SPV 422’) using Saccharomyces cerevisiae 2011

Optimization of Silver Recovery from Used Radiograph Films (URF) via Sodium Hydroxide Stripping

Design, Fabrication, and Preliminary Testing of a Laboratory Scale Packed Bed Gas Absorption Column for Carbon Dioxide Gas Capture

Parametric and Optimization Studies for the Acetone Extraction of Polyphenols from Mango Peel

Comparative Study on the Removal of Oxytetracycline From Aqueous Solution by Adsorption Using Commercial and Cacao Bean Shell Derived Activated Carbon

Optimization Study on the Thermal Decarboxylation of Coconut Oil Using Bentonite as Catalyst

Parametric Study on the Solid Substrate Fermentation of Poly-γ-Glutamic Acid by a Locally Isolated Bacillus subtilis

Optimization of Soil Washing Conditions using Chitosan for the Removal of Nickel from Contaminated Soil

Parametric Study on Solvent Extraction of Oil From Petroleum Nut (Pittosporum resiniferum Hemsl.) using Ethanol as Solvent

Parametric Study on the Viability of Freeze Dried Lactobacillus plantarum BS as Starter Culture for Cream Cheese Production

Retrofitting and Testing of a Laboratory-Scale Spitzkasten Classifier

Parametric and Kinetic Studies on the Color Removal of Aqueous Methylene Blue by Photocatalysis using Pelletized Magnesia (MgO) As Photocatalyst

Biodiesel Production from Refined Coconut Oil using NaOH-Impregnated CaO Catalyst Dervied from Waste Chicken Eggshells with Petroleum Ether as Co-Solvent

Parametric Study on Methanolysis of Refined Coconut Oil using Potassium Hydroxide-Impregnated Calcium Oxide from Eggshells as Catalysts and Tetrahydrofuran as Co-Solvent

Parametric Study on Methanolysis of Refined Coconut Oil using Potassium Hydroxide-Impregnated Calcium Oxide Derived from Eggshells and Tetrahydrofuran as Co-Solvent

Parametric Study on the Absorption of Carbon Dioxide by Water in a Packed Bed Column

Parametric Study on the Removal of Oxytetracycline from Aqueous Solution by Adsorption using Coconut Shell-derived Activated Carbon

Optimization Study on the Thermal Decarboxylation of Coconut Oil using Magnesium Oxide as Catalyst

Parametric Study on Vermicomposting Filter Cake using African Nightcrawlers (Eudrilus euginae) and Field Testing of the Vermicast on Pechay (Brassica rapa) Plants

2015

Optimization and Scale-up Studies for the Production of Biosurfactant by Saccharomyces cerevisiae 2031 in a Stirred Tank Bioreactor using Molasses and Coco Paring Meal as Substrate

Parametric and Optimization Study of the Acid Extraction of Nickel from the Hyperaccumulator Plant Rinorea bengalensis

Parametric, Optimization and Downstream Processing of Enzyme-Mediated Extraction of Betacyanin from Dragon Fruit (Hylocereus undatus) Peel for Use as Food Colorant

Parametric Study on Ethanol Fermentation of Sweet Sorghum [Sorghum bicolor (L). Moench.] SPV 422 Syrup Using Schizosaccharomyces pombe

Parametric Study on Thermal Decarboxylation of Coconut Oil Using Magnesium Oxide as Catalyst

Rice Hull as a Low-Cost Alternative Adsorbent for the Removal of Methylene Blue from Simulated Textile Wastewater in Batch and Rapid Small-Scale Column Test Systems

Rice (Oryza sativa) Husk as a Low-Cost Adsorbent Alternative for the Removal of Copper (II) Ions from Aqueous Solutions

Parametric Study on the Photocatalytic Decolorization of Congo Red Dye Solution Under Solar Radiation Using a Parabolic Dish Solar Concentrator

Chemical Coagulation of Salted Whey Effluent for the Reduction of Chemical Oxygen Demand (COD) and Turbidity

Parametric Study on the Adsorption of Synthetic Wastewater Containing Melanoidin Using Bagasse Fly Ash as Adsorbent

Parametric Study on Microwave-assisted Alkaline Pretreatment of Hybrid Abaca (Musa sp.) Stripping Waste as a Potential Feedstock for Bioethanol Production

Parametric Study on Mixotrophic Cultivation of Chlorella vulgaris Beijerinck for Biodiesel Production

Parametric Study on Photocatalytic Decolorization of Synthetic Melanoidin Using a Parabolic Dish Solar Concentrator

Parametric Study on Oil Absorption using Acetylated Sugarcane Bagasse as Absorbent

Parametric Study on Thermal Decarboxylation of Coconut Oil Using Calcium Carbonate as Catalyst

Parametric Study on the Ethanol Fermentation of Sweet Sorghum [Sorghum bicolor (L.) Moench ‘SPV 422’] Syrup Using Different Yeast Strains Under Sterilized and Unsterilized Conditions

Parametric study on Thermal Decarboxylation of Coconut Methyl Ester Using Calcium Carbonate as catalyst

Optimization and Scale-up Studies for the Production of Biosurfactant by Saccharomyces cerevisiae 2031 in a Stirred Tank Bioreactor using Molasses and Coco Paring Meal as Substrate

Optimization of Photocatalytic Decolorization of Aqueous Rhodamine B Solution using Box Benkhen Method

Parametric study on acid hydrolysis of kapok (Ceiba pentandra (L.) Gaertn.) fibers for cellulose nanocrystals production

Optimization of a Detoxification Process for the Removal of Furfural by Activated Carbon Adsorption in a Model System of Simulated Lignocellulosic Hydrolysate

Parametric and Isotherm Studies for the Batch Adsorption of Methylene Blue Dye Using Waste Tea Leaves as Adsorbent

Rice Hull as a Low-Cost Alternative Adsorbent for the Removal of Methylene Blue from Simulated Textile Wastewater in Batch and Rapid Small-Scale Column Test Systems

Rice (Oryza sativa) Husk as a Low-Cost Adsorbent Alternative for the Removal of Copper (II) Ions from Aqueous Solutions

Parametric Study on the Photocatalytic Decolorization of Congo Red Dye Solution Under Solar Radiation Using a Parabolic Dish Solar Concentrator

Parametric Study on Microwave-assisted Alkaline Pretreatment of Hybrid Abaca (Musa sp.) Stripping Waste as a Potential Feedstock for Bioethanol Production

Parametric Study on Photocatalytic Decolorization of Synthetic Melanoidin Using a Parabolic Dish Solar Concentrator

Optimization of Photocatalytic Decolorization of Aqueous Rhodamine B Solution using Box Benkhen Method

Parametric and Isotherm Studies for the Batch Adsorption of Methylene Blue Dye Using Waste Tea Leaves as Adsorbent

2014

Production and Partial Purification of Pediocin from Pediococcus acidilactici 4E5 using Coconut Paring Meal Extract as Substrate

A Parametric Study on the Cementation of Polyethylene Terephthalate (PET) and Coloured Glass Bottles into Concrete Hollow Blocks (CHB)

Design, Fabrication and Preliminary Testing of a Laboratory-scale Rotary Vacuum Drum Filter for Cane Sugar Mud

Fermentation Conditions for Maximum Flocculation and Settling Performance of Saccharomyces cerevisiae TB3 in Reconstituted Sugarcane Syrup Medium

Parametric Study on the Photocatalytic Decolourization of Acid Orange 7 Dye using Full Factorial Design of Experiment

Design, Fabrication and Preliminary Analysis of A Series and Parallel Centrifugal Pump Arrangement

Design, Fabrication and Preliminary Testing of a Laboratory-scale Rotary Vacuum Drum Filter for Cane Sugar Mud

Reduction of Methane Emission from Laboratory-Scale Anaerobic Digester through Variable Diffused Aeration

Thermal Decarboxylation of Coconut Fatty Acid Distillate to Hydrocarbons using Calcium Carbonate Catalyst at Ambient Pressure

2013

Evaluation of Biofilm Development on Different Carrier Materials using Biofilm-forming Bacteria

Analysis of the Efficiency and Technical Performance of R-290A (Propane) Refrigerant and R-290A/R-170 (Ethane) Mixture Refrigerant Blends in a Fabricated Refrigeration System

Parametric Study on Photocatalytic Decolorization of Rhodamine B Dye Solution

A Comparative Study of Sugarcane Bagasse and Boiler Ash for the Adsorption of Basic Malachite Green from Simulated Textile Wastewaster

Calcium Peroxide as an Alternative Source of Hydrogen Peroxide in Fenton’s Process for the Treatment of Public Market Wastewaster

1996

Design, Fabrication, and Preliminary Testing of a Laboratory Water Distilling Apparatus

Performance Evaluation of a Centrifugal – Shredder for Sugar Cane Juice Extraction

Purification and Modification of Almaciga (Agathis philippinensis Warb.) Resin for Paint Manufacture)

A Parametric Study on the Continuous Production of Lactic Acid by Immobilized Lactobacillus acidophilus

Solvent Extraction of Oil from Hanga Nuts (Pittosporum resineferum Hems.)

Design, Fabrication, and Preliminary Testing of a Double Pipe Heat Exchanger

Parametric Analysis of the Ferrite Process

Performance Evaluation of a Mechanical Pelletizer and Preliminary Studies on the Saccharification Conditions using Aspergillus niger Pellets

Kinetic and Parametric Study of Aqueous Enzymatic Extraction of Soybean Oil

Solvent Extraction of Essential Oils from Sampaguita, Jasminum sambac (L.) Ait.

Design, Fabrication and Preliminary Testing of a Laboratory-Scale One-Shell Pass, Two-Tube Pass Floating Head Condenser

Purification and Modification of Araucaria (Araucaria excelsa R. Brown) Resin for Paint Formulations

Design, Fabrication and Preliminary Testing of a Direct Contact Jet Condenser

1995

Performance Evaluation of a Twenty-Liter Batch-Type Ethanol Distilling Column

Effects of Algae and Water Hyacinth on Pollution Load Reductions of Abattoir Wastewater using Ten Cubic Feet Oxidation Pond

Recovery of Oil from Nata de Coco Waste

Improvements and Performance Evaluation of a Fluidized Bed Gasifier

Production of Concentrated Lactobacillus bulgaricus by Continuous Fermentation Coupled with Filtration

Gas Absorption Simulation of Ammonia-Air-Water System in a Packed Column

Film Evaporation under Vacuum for Dehydration and Deodorization of Coconut Oil

Design, Fabrication and Testing of a Gas-Fired Water Distiller with Air-cooled Condenser, Feed Water Heater and Water Tube

Chemical Coagulation and Cementation for Decolorizing Distillery Slop Digester Effluent

Design, Fabrication and Testing of a Gas-fired Distilling Apparatus Using Shell And Tube Condenser And Double Tube Heat Economizer

Design, Fabrication, and Preliminary Testing of a Rotary Flow Dust Collector

Design, Prototype Fabrication and Preliminary Testing of a Gas-Fired Indirect-Heat Rotary Carbon Activator

Production of Muscovado Sugar from Sugarcane. I. Milling Experimental Study II. Pre-feasibility Study

Simulation Modelling and Performance Evaluation of a Laboratory Scale Gas-Fired Vertical Fire-Tube Boiler

Chitin Extraction from Prawn (Penaeus monodon) Waste

1994

Design, Fabrication, and Preliminary Testing of a Simple Oxygen Bomb Calorimeter

Performance Evaluation of a Laboratory-scale Fluidized Bed Set-up

Performance Evaluation of a Laboratory Scale Wetted-wall Column

Production of Methanol from Bagasse Pyrolysis

Performance Evaluation of a Laboratory-Scale Rotary Dryer

Performance Evaluation of a Gas-fired Vacuum Evaporator for Drying Coconut Oil

Testing and Evaluation of a Bench-scale Packed Column for Coconut Oil Drying

Design, Fabrication, and Preliminary Testing of a Laboratory Scale Batch Reactor for the Removal of Chromate Ions from Metal Plating Waste Water

Michaelis-Menten-Aiba Kinetics of Batch Ethanol Fermentation using Saccharomyces cerevisiae HBY3 Strain

Modeling and Simulation of Steam Generator Coupled with a Steam Reservoir

Extraction Efficiency of A Laboratory Scale Continuous Counter Current Solid-Liquid Extractor for Oil Extraction from Copra Meal

Production of a High Density Culture of Lactobacillus acidophilus by a Cross-flow Culture Method

Extractor for the Extraction of Rotenone from Derris elliptica

Design, Fabrication and Preliminary Testing of a Laboratory Scale Gas-fired Water Distiller

Design, Testing and Fabrication of a Laboratory Scale Packed Tower for Distillation

Small-scale Soap Production using Cold Process: Preliminary Testing on the Effect of Temperature and Cost Analysis (Abstract)

Feasibility Study on the Production of Granular Activated Carbon from Coconut Shell

Performance Evaluation of a Laboratory-Scale Single-Pass Shell-and-Tube Condense

Column Performance Evaluation of Activated Carbon From Coconut Shell

Performance Evaluation of a Laboratory Scale Sieve Plate Distilling Column

A Preliminary Study on the Evaporation Behavior of Hexane – Safflower Oil Mixture

Solvent Extraction of Oil from Safflower (Carthamus tinctorius L.) Seeds

Characterization of the Effluent and Effect of Minimization Techniques on the Cleaning Waste Stream

Growth Kinetics and Solvents (Acetone, Butanol and Ethanol) Production of Clostridium acetobutylicum Fe 843 Strain Using Continuous Fermentation Process

Performance Evaluation of a Laboratory-Scale Packed Column

Efficacy Of Pleurotus sajor-caju Biotech 3031 Mycelium Production Using Submerged Culture Process

1993

Performance Evaluation of a Continuous Clarifier

Design, Fabrication, and Testing of a Continuous Laboratory-scale Pyrolysis Reactor for the Production of Charcoal from Rice Hull

Single-Cell Protein Production Using Coconut Water and Molasses

Separation of Methyl Esters and Glycerol by Gravity Settling

Carbonization of Rice Hull and Chemical Activation of Rice Hull Charcoal by Phosphoric Acid for the Production of Powdered Activated Carbon

Characterization of Coconut Sugar Produced Using a Bench-Scale Evaporator

Kinetics of Substrate Utilization, Ethanol Production and Biomass Formation of Saccharomyces cerevisiae HBY3 Strain Under Aerobic Conditions

Determination of the Optimum Conditions for the Separation of Coconut oil-and-water Mixture Using a Laboratory Bottle Centrifuge

Equilibrium Isotherms of Ion Exchange Resins Used in the Adsorption of Lysine

Design, Fabrication and Preliminary Testing of a Laboratory-scale Gas-fired Vertical Fire-tube Boiler

Optimization of Process Condition for Enzymatic Coconut Oil Extraction using Gamannase 1.5L

Separation of Suspended Solids in Coconut Oil

Production of Acetic Acid by Repeated Batch Fermentation

Design, Fabrication and Preliminary Testing of a Laboratory Scale Fermentor

Raw Sugar Factory and Refinery Practice at Victorias Milling Company, Inc., Victorias, Negros Occidental

Small-scale Deodorization of Coconut Oil under Atmospheric Pressure using a Steam Generator

Engineering Parametric Study on the Milling and Extraction of Rotenone and Rotenoids from Derris elliptica

Kinetic Analysis of Lysine Production for Different Process Conditions of Biotin, Homoserine and Oxygen-enriched Air

Performance Characteristics of Solvent Extraction of Penicillin using Butyl Acetate

Design, Fabrication and Testing of a Cyclone Separator Unit

Evaluation of a Bench-scale Vacuum Evaporator for Coconut Oil Drying

Raw Sugar Factory and Refinery Practice at Victorias Milling Company, Inc., Victorias, Negros Occidental

Chemical Activation of Coconut Shell Charcoal by Zinc Chloride

Modification and Performance Evaluation of a Laboratory-scale Alcohol Reboiler

Activation of Coconut Shell Charcoal by Steam

Fed-batch Protein Enrichment of Cassava by Solid-state Fermentation: Optimization of Process Conditions and Preliminary Economic Feasibility Study

Determination of the Operational Capacity of a Direct Contact Condenser

1992

Predictive Study on the Effect of Using Glucoamylase on the Batch Extraction of Coconut Oil

Optimization of the Fed-Batch Fermentation Process for Lysine Production

Design, Fabrication, and Preliminary Testing of a Laboratory-scale Continuous Pasteurizer for Coconut Water

Testing and Performance Evaluation of a Laboratory-scale Juice Heater

Modelling and Performance Evaluation of a Distillation Column for Ethanol-Water Separation

Predictive Study on the Use of Viscozyme 120L and Gamanase 1.5L in the Aqueous Extraction of Coconut Oil

Performance Evaluation of a Ceramic Cross-flow Filter for L-Lysine Fermentation

Design and Testing of a Simple Village Level Deodorizing System for Coconut Oil

Kinetic Studies on Single-cell Protein (SCP) Production by Batch Fermentation

Predictive Study on the Effects of using Aspergillus niger in the Aqueous Extraction of Coconut Oil

Predictive Study on the Effect of Using Microbial-Derived Enzymes for the Aqueous Extraction of Coconut Oil

A Predictive Study on Aqueous Coconut Cream Extraction using α-Amylase

Glucose Syrup Production from Cassava Flour Using Commercial a-Amylase and Glucoamylase

Computer Model of the Sugar Distribution System of the Canlubang Sugar Estate

Design, Fabrication and Preliminary Testing of a Laboratory-scale Continuous Stirred Tank Reactor (CSTR)

Evaluation of a Bench-scale Soap Kettle for the Production of Full-boiled Soap

1991

Predictive Study on Aqueous Extraction of Coconut Oil using Celluclast 1.5L

Production of Sweet Potato Beverage

Oxygen Transfer for Scaling-up Process of Lysine Production

Design, Fabrication and Preliminary Testing of a Laboratory-scale Air Pre-heater with Annular Fins

Design, Fabrication and Preliminary Testing of Induced-draft Counterflow Cooling Tower

Design, Fabrication, and Preliminary Testing of a Laboratory-scale Continuous and Batch Centrifugal Filters

Design, Fabrication, and Preliminary Testing of a Laboratory-scale Continuous Thickener

Design, Fabrication, and Preliminary Testing of a Laboratory-scale Bubble-cap Distilling Column

Production of Acetic Acid from Ethanol by Cells Immobilized in Calcium-Alginate Gel

Establishment of Parameters for the Design and Operation of a Pilot Scale Unit Reactor for Methyl Ester Production

Design, Fabrication and Pre-testing of a Laboratory Scale Continuous Counter-current Solid Extractor

Design, Fabrication, and Preliminary Testing of Coil-Type Evaporator

Optimization of pH and Initial Sugar Concentration for Citric Acid Production using Hydrolyzed Cassava Starch as Substrate

Batch Process Lactic Acid Fermentation from Molasses

Studies on the Effect of Initial Glucose Concentration and Dilution Rate of Glutamic Acid Production using Continuous Process

Design, Fabrication and Preliminary Testing of a Laboratory-Scale Packed Column

The Design, Fabrication and Preliminary Testing of the Laboratory-Scale Continuous Rotary Dryer

Design, Fabrication and Testing of a Laboratory Scale Fluidized Bed

1990

Design, Fabrication and Testing of a Laboratory Scale Sieve-Plate Distilling Column

Lysine Separtion by Ion Exchange using Amberlite IR-20

A Study on Micro-gels Beads Formation for Microbial Immobilization

Design, Fabrication and Testing of a Fluid Flow Apparatus

Design, Fabrication and Testing of a Laboratory Scale Rotary Drum Vacuum Filter

Design, Fabrication and Testing of a Laboratory Scale Bare and Finned Inside Tubes Double Pipe Heat Exchangers

Process Development for Refinement of Crude Carrageenan

Studies on the Diffusion Characteristics of Sodium-Alginate Gel Heads

Design, Fabrication and Testing of a Laboratory Scale Reboiler

Pre-feasibility Study of Producing Industrial Alcohol from the Small Lamabanog Producers – Central Distillery Model

Preparation and Testing of Activated Carbon from Carbonaceous Rice Hull and Bagasse Ashes in Decolorizing Molasses Distillery Slops

Design, Fabrication and Testing of a Laboratory Scale Single Pass Shell-and-Tube Condenser

Design Fabrication and Testing of a Laboratory Scale Spitzkasten Classifier

Effect of Different Methods of Drying on the Drying Time, Rat, and Properties of Handmade Rice Paper

An Air-lift Fermentor for the Protein Enrichment of Manihot esculenta by Solid Fermentation

1989

A Study on the Effect of Air Flow Rate, Particle Diameter and High Cell Concentration on the Volumetric Oxygen Transfer Coefficient

Design of a Medium Scale Aerobic Compost Digester

Studies on Gas Holdup and Ethanol Stripping Process Using a Bubble Column Reactor

Simultaneous Fermentation and Stripping Process Coupled with an Adsorption-Desorption System

Automatic Ammonium Ion Concentration of Cultivation Processes